Filora High Speed PLA 1KG — 1.75mm

Engineered for 200–600mm/s — this is not regular PLA running hot, it is purpose-built high-speed filament.

Filora High Speed PLA is reformulated at the chemistry level for low-viscosity flow at speed. Standard PLA starves your hotend at 300mm/s+. This does not. Optimized for Bambu Lab X1C, P1S, P1P, and high-flow Voron setups with Volcano or Revo hotends.

• Nozzle temp: 200–230°C (210–220°C optimal at high speed) | Bed temp: 35–65°C
• Print speed: 200–600mm/s — verified on X1C with 0.4mm nozzle
• High-flow formula — reduced viscosity prevents underextrusion at speed
• Bambu AMS compatible — runs reliably in multi-material setups
• Diameter tolerance: ±0.02mm — tight consistency for pressure advance tuning
• Same mechanical properties as standard PLA — no strength tradeoff at speed

Drop this into your X1C or P1S and run the Bambu high-speed profile. Print a functional prototype in 20 minutes that used to take an hour. Also works on any printer with a high-flow hotend capable of 20+ mm³/s volumetric output.