Filora PLA Carbon Fiber 1KG — 1.75mm
Free shipping on orders over $49
Stiffer, lighter, sharper — chopped carbon fiber transforms PLA into a proper engineering material.
PLA Carbon Fiber blends short-strand chopped carbon fiber into a standard PLA base. The result is meaningfully stiffer than unfilled PLA, slightly lighter, and comes off the printer with a sharp matte CF finish. No post-processing. It still prints at PLA temperatures with minimal fuss — just swap to a hardened nozzle first.
- Nozzle temp: 190–220°C | Bed temp: 25–60°C
- Hardened steel nozzle required — carbon fiber is abrasive; brass nozzles wear out in hours
- ~20–30% stiffer than standard PLA — significantly reduced flex under load
- Matte CF surface finish — no sanding or painting needed for an engineered look
- Lighter than unfilled PLA — CF lowers density slightly
- Diameter tolerance: ±0.03mm | 1KG net weight
Best for: RC frames, drone arms, tool handles, camera mounts, rigid brackets, and anything where standard PLA flex is a problem but you want to stay at easy PLA temps. Recommended for printers with direct drive and a 0.4mm+ hardened nozzle.
These are recommended starting points. Fine-tune based on your specific printer and environment.
Tested and validated on these printers. Works great out of the box.
Store in an airtight container or resealable bag with silica gel desiccant. Keep away from humidity and direct sunlight.
This filament is 1.75mm diameter — the standard for Bambu Lab Prusa Creality Ender Voron and most modern FDM printers.
Most PLA/PLA+ filaments do not require an enclosure. Higher-temp materials like ABS or ASA perform better with an enclosure.
Yes! Most of our standard filaments work well in Bowden setups. TPU requires a direct-drive extruder for best results.
We ship from our US warehouse. Orders placed before 2 PM PST ship same day. Standard delivery is 3-6 business days.
You may also like
