Filora PLA+ Filament 1KG — 1.75mm

PLA that does not snap. Twice the impact resistance, better layer adhesion, functional part performance.

PLA+ is not marketing — it is a reformulated blend with impact modifiers that change how the material behaves under stress. Standard PLA shatters. PLA+ flexes first, absorbs the hit, and often survives it. If you are printing brackets, clips, enclosures, and parts that get handled or dropped, PLA+ is the right call.

• Nozzle temp: 195–225°C | Bed temp: 25–60°C
• ~2x impact resistance vs standard PLA — verified via Charpy impact testing
• Better interlayer adhesion — layers bond stronger, reducing delamination under stress
• Slightly more flexible — bends before breaking; survives drop testing better
• Same print settings as PLA — no special hardware or enclosure required
• Diameter tolerance: ±0.02mm | 1KG net weight

Go-to for: phone mounts, tool holders, snap-fit assemblies, hinges, boxes with lids, and functional parts that get dropped or stressed. All the printability of PLA, with mechanical properties closer to PETG where it counts most.